Tag Archive | "Build"

How Do You Build A Fish Pond Filter.?


The pond is 6ft x 10ft x 5ft deep with a ancient filter gravity fed

Posted in Pond FiltersComments (3)

How To Build A Homemade Pond Filter.?


Is it possible that someone could give me plans (with pictures) on how to build a pond filter that sits outside my pond. The pond can only hold about 500 gallons so I don’t need anything huge.
Please try and find pages with specific instructions.

Posted in Pond FiltersComments (4)

How to Build Patio Waterfalls


If you like the look of patio waterfalls but find that the readymade ones are too expensive for your budget, you can easily make one of these garden features yourself. To make the waterfall look more authentic use rock as the base material. In every garden rocks are readily available and thus won’t cost you any money at all. In fact if you are landscaping and have too many rocks you can save money by building a garden water feature (http://www. garden-fountains. com/Detail. bok?no=2922) instead of having to pay to have the rocks taken away. Along with making sure you have enough rocks for the patio waterfalls you want to build, you do need to buy a pump to recirculate the water from the pond to the waterfall and have it come back to the pond again. You can design your waterfall in whatever size and shape you wish to make an emphatic statement, but the main factor that you have to take into consideration is how high you want this waterfall to be. You can take advantage of a sloping area to make large waterfalls (http://www. garden-fountains. com/Detail. bok?no=97) or erect a beam behind it to make an artificial slope. You do need to buy the building material and a liner that is flexible enough to channel the water from the pool you make so that it will cascade the water down the waterfall. You then need to place the boulders on top of this liner to hold them in place. You may choose to have the water spill dramatically over the rocks in the patio waterfalls you make or you may want to just have the water flow gently. To have a spillway, you need to have a large flat rock that has smaller and rounder rocks underneath it that build it up to the height you desire. It should be nearly like an overhang and the higher you have this flat rock above the next level, the more dramatic the waterfall will be. Bluestone and thick slabs of fieldstone produce an brilliant effect in patio waterfalls. You can also mix these two types of stone in the same waterfall to make it look very natural – nearly as if you built your patio around it. You do need to have at least two spillways in a waterfall, which means you need several different levels. Once you choose on the overall height of the waterfall, then you can use some mathematical skill to figure out how high each of the levels should be. You can also mix larger rocks in with smaller sizes, such as pebbles and beach rocks. The focal point should be that you have water pouring down from higher to lower levels and collecting in a pool at the bottom. You can enhance the waterfall by having small plants growing along the sides. Making your own patio waterfalls does involve a lot of work. Before you start reckon about the time you will have to spend on this project and check out the cost of the supplies you will need to buy. When you compare the cost and factor in the time, you may well choose that it is a cheaper option to buy a kit or a waterfall that is already made and ready to install. There are precast concrete forms that will replicate the look of stone for the waterfall that are not as expensive as you may reckon.

Posted in Waterfall PumpsComments (0)

Tips On How To Build A Pond


A pond is not only a stunning garden feature but is also a wonderful wildlife habitat, attracting birds, insects and many other animals.
Building a pond from scratch can seem a daunting task but it need not be, having the right equipment and understanding what form of pond will suit your needs is half the battle.
The first thing to consider when you build a pond is where it will be located, try to view where the pond will be from many different angles, try looking from an upstairs window also, use what ever you have to mark out a make believe pond so you can see it from different angles.
You need to consider the size of your pond, this will be affected by the size of your garden and what you are considering to have in the pond. A larger pond would be needed for larger fish such as koi carp where as a smaller pond would suit goldfish or if the pond was just for newts and frogs.
Once you have defined the parameter of the pond (this is often done with string or hosepipe) and you are pleased with the size and positioning you will need to excavate the area. Dig out the turf and keep going until the required depth is achieved, remember to remove any sharp stones or large lumps of mud.
When digging the pond it is recommended that you leave one side with a slop so any animals that accidentally fall in have a way of getting out, it is also a place where you fish can bask in the sun.
Once you have dug the pond you will need to lay a base, if you choose to use concrete then you will need to add some sort of wire to it to bind it together and prevent it from cracking, sand is another option, lay a layer of sand around the hole you have dug, this will protect the pond liner and help to prevent it from being punctured. Adding a layer of ancient carpet adds to this protection.
Once the base has been laid you need to position your pond liner, this will require some help depending on the size of your pond. Question a friend to help with this part, hold each end and lay over the hole you have dug out, take care not to hurt the liner by dragging it over rough ground or sharp stones.
Once the liner is in place secure the sides with some bricks and most importantly leave plenty of overlap.
Once the liner is in place it is time to start to fill your pond, as the pond is being filled it is vital to pull the edges of the liner so it fits neatly in the contours of the pond.
Keep adding water until the pond is full then cut away any excess liner leaving an overlap large enough to lay slabs or turf on to keep in place.
Stand back and have a look at what you have made!, Now you have the job of chose which fish and plants you will add and position around your new pond.

Posted in Large Pond PumpsComments (0)

Build a Pond Easily with Pond Kits


You will be pleased to know that you can define one's own garden pond kits available today a number of pond. By choosing the right packaging can be a pond pond built in the professional appearance of your garden in a couple of days, and all of its own, too. It is also very affordable. There are many places where the supply of the pond are available under one roof, if it is a pond pump, pond filter, pond waterfall, fountain or pond in the garden pond plants that you might be looking for. Pond Kits save a lot of problems to find and hire a contractor to whom you can trust, including the time and money that it would happen, if looking for all the individual components separately in their own pond. Most pond kits have nearly everything you need for a pond, and you can make sense of satisfaction that the pond was built all by himself. All you have to do is add a few fish and some plants of the garden pond and the pond is ready! Most kits come pond liner pond, pond hole in the bucket, starter bacteria, pond pump, waterfall pond, silicone sealant, which – chlorinators, the food thermometer into the pond fish. Most pond kits, if you select the Advanced category, or the base rate should be complete information on hoe to determine pond. It is certainly simpler to buy all the products together than to buy piece by piece. In addition, you will get a discount when buying multiple copies, that come in kit. Do you reckon the entire pond, then a natural garden pond plants, some are artificial, but natural to help oxygenate the water is a excellent fish. Furthermore, the waste is left out of the fish is absorbed by plants, clean water is a process. Pond kits come in various shapes and sizes. If you plot to fish in the pond, ensure that the pond may have more than one hundred liters. One of the most commonly used in garden pond plant is water hyacinth. Not only is growing rapidly, but has a excellent filtration of water, in fact, even the use of waste water treatment plants. Initially, they get used to the sun, but later on can be placed anywhere, sun or shade. Sometimes, the water hyacinth roots of confusing and you are questioned to be removed to promote new growth. Pond Kits are a fantastic advantage to those who are new to this concept, because it makes the job much simpler. Once you've made a pond, make sure that you have to learn to maintain it. In addition, pond kit, you can also use other materials such as pond pond lights, pond waterfalls, fountains and garden pond plants to improve the beauty of your pond.

Posted in Pond FiltersComments (0)

External Pond Pumps (39)
Fountain Pumps (125)
Large Pond Pumps (70)
Pond Filters (118)
Pondmaster Pumps (21)
Underwater Pond Pumps (32)
Waterfall Pumps (106)

WP Cumulus Flash tag cloud by Roy Tanck and Luke Morton requires Flash Player 9 or better.

Advisory

Some of the products mentioned use affiliate links, for which we receive compensation when you make a purchase. In no case does this cause you to pay extra for a product, or cause us to give a favorable review or recommendation to a product that we think is inferior.

Wordpress Design and Development | Search Engine Optimization